S-Flex 90A™

Where durability and flexibility are essential

Spectrum S-Flex 90A is a filament designed for 3D printing, which enables you to manufacture flexible items in a much simpler way than with other materials of this type. The appropriate composition of the material provides for good adhesion both between layers and between the printed item and the build platform.

Due to the resistance to hydrocarbons and good lamination between layers, S-Flex 90A allows manufacturing of sealing items which need to be resistant to any operating fluid ensuring the best tightness possible. Parts made of this material can be used as energy absorbers, i.e., all kinds of bumpers or vibration dampers.

In addition to the above-mentioned properties, S-Flex 90A material is also characterized by good resistance to UV radiation and high resistance to aging. Flexible filament S-Flex 90A shows resistance to weak and diluted acids and bases.

Available diameters:
  • 1.75mm
  • 2.85mm
Available weights:
  • 250g
  • 500g
  • 1000g
  • 2000g

Technical data

Material:
Flex
Available diameter:
1.75 [mm]
Available weight:
250 / 500 [g]
Diameter tolerance:
+/- 0.05 [mm]
Density:
1.22 [g/cm3]
Shore hardness:
90A
Verify your spool:
YES (course of diameter – online graph - on the entire length of the spool, mean diameter, ovality, standard deviation individually for each manufactured spool)

How to use

Nozzle temperature:
200-230°C
Bed temperature:
50-70°C
Heated chamber:
Not required
Active cooling fan:
50%
Print speed:
15-50 mm/s
Flowrate:
100-105%
Bed adhesive:
Magigoo, 3DLac, Dimafix

Material characteristics

  • very good wear and tear resistance
  • up to 500% elongation at break
  • Shore-A hardness of 90
  • resistance to many common industrial oils and chemicals
  • low shrinkage
  • high quality surface
  • reduced stringing while the printer is running idle
  • stability of shape and material properties in the temperature range -30 to + 60°C

Usage

  • manufacturing of seals with a high chemical resistance
  • production of items, which has to be used as energy adsorbents
  • functional parts
  • all kinds of bumpers, vibration dampers
  • guides
  • protective cases
  • snap-fit parts
  • sleeves
  • hinges
Verify Your Spool

Check out our tool to verify purchased filaments.

Where to buy

Check the list of our local and online distributors.

Verify Your Spool

As the only company in Poland and one of the few in the world, we have a tool to verify purchased filaments.

Where to buy

Check the list of our local and online distributors.

A wide range of products
High quality
European made
Professional technical support
facebook twitter youtube vimeo linkedin instagram whatsup