Download

PC

Technical Data Sheet Safety Data Sheet

PC 275

PC 275 - an excellent choice for all 3D printing enthusiasts and professionals looking for a material with exceptional properties.

Download file

PC/PTFE

PC high mechanical resistance combined with PTFE wear & friction, HDT - 140°C, VICAT - 145°C, low friction coefficient.

Download file Download file

Bio-performance

Technical Data Sheet Safety Data Sheet

GreenyHT™

Based on high-performance biopolymer with a softening temperature (VICAT) of up to 100°C.

Download file Download file

GreenyPro

GreenyPro is a new filament from the bio-performance series

Download file

Soluble

Technical Data Sheet Safety Data Sheet

AquaPrint

AquaPrint is a water-soluble support material designed for complex multi-extrusion 3D printing.

Recycled

Technical Data Sheet Safety Data Sheet

rPLA

Environmentally friendly, made from recycled residual waste; wound on a cardboard, ecological spool.

Download file Download file

rPETG

Environmentally friendly, made from recycled residual waste; wound on a cardboard, ecological spool.

Download file Download file

5PACK

Technical Data Sheet Safety Data Sheet

5PACK (5x 0.25kg)

PPS

Technical Data Sheet Safety Data Sheet

PPS AM230™

Based on an engineering polymer with exceptionally high mechanical properties

Download file Download file

PCTG

Technical Data Sheet Safety Data Sheet

PCTG Premium

Excellent alternative to PET-G, increased impact strength, combines features of Tough PLA and PET-G, HDT - 76°C.

Download file Download file

PCTG GF10

Durability of PCTG enhanced by the advantages of glass fibre.

Download file Download file

PCTG CF10

The carbon fibres used give the filament an extremely high stiffness.

Download file Download file

Wood

Technical Data Sheet Safety Data Sheet

WOOD

Biodegradable, natural wood content, perfect side surface for prints.

Download file Download file

Ceramics

Technical Data Sheet Safety Data Sheet

Alumina

It contains alumina powder of high purity (99.7%). The organic content of the filament amounts to about 19.5% by mass.

Silicon Carbide

It contains high-purity silicon carbide powder. The organic content of the filament is about 21.4 percent by mass.

Zirconia

It contains zirconium powder of high purity. The organic content of the filament is about 14.0 percent by mass.

Silicon Nitride

It contains ceramic powder of high purity. The organic content of the filament is about 21.5 percent by mass.

PLA

Technical Data Sheet Safety Data Sheet

Light Weight PLA

Spectrum Light Weight PLA is a modern filament based on PLA

PLA Crystal

PLA Crystal for transparent and semi-transparent effects in their projects.

Download file Download file

Pastello PLA

The new Pastello PLA filament series is the essence of beauty and delicacy in the world of 3D printing

Download file Download file

Huracan PLA

Huracan PLA is an innovative filament designed for high speed 3D printing (up to 350mm/s)

Download file

PLA Nature

The PLA Nature series was designed with the intention of creating new textures in 3D printing materials through the use of bio-fillers.

Download file Download file

PLA Pro

Alternative to ABS, high impact resistance, improved flowability, HDT 85°C (annealed).

Download file Download file

rPLA

Environmentally friendly, made from recycled residual waste; wound on a cardboard, ecological spool.

Download file Download file

PLA Premium

The most popular 3D printing filament, biodegradable, user friendly, no warping.

Case study - check what this filament has been used for:

PLA Glitter

Blended with unique glitter-gloss particles, not abrasive.

Download file Download file

PLA MATT

Biodegradable PLA-based filament with additives allowing to obtain a matte surface of prints.

Download file Download file

PLA Glow in the Dark

Unbelievably strong after-glow effect, smooth surface after printing.

Download file Download file

PLA SILK

Unique silky structure of prints; original, phenomenal colors; user friendly, easy to print.

Download file Download file

PLA Carbon

10% CF, improved hardness & rigidity, high aesthetic, matte surface quality.

Download file Download file

PLA Tough

Tough like ABS, easy to print like PLA.

Download file Download file

PLA Thermoactive

Filament based on pure PLA blended with a thermochromic pigment, color changing ability at ca. 30°C.

Download file Download file

PLA Stone Age™

Original series of PLA-based filaments created to imitate the "stony" structure of the printed items.

Download file Download file

PP

Technical Data Sheet Safety Data Sheet

PP

Modified neat, chemical & termal resistance, VICAT - 135°C, HDT B - 80°C.

Download file Download file

PET

Technical Data Sheet Safety Data Sheet

ecoPET 9021

Eco-friendly polyester, technical material with more than 90% recycled content.

Download file Download file

PET CF15

15% carbon fiber, high Z-strength, service temp. 125°C, good tribological properties.

Download file Download file

HIPS

Technical Data Sheet Safety Data Sheet

HIPS-X™

Lightweight, high impact resistance, completely soluble in D-Limonene, HDT B - 88°C.

Download file Download file

ASA

Technical Data Sheet Safety Data Sheet

ASA-X CF10™

Composite filament based on an appropriately selected ASA with carbon fibre filling.

Download file Download file

ASA Kevlar

Spectrum ASA Kevlar filament is a technical composite material based on a combination of ASA copolymer and aramid fibres.

Case study - check what this filament has been used for:

ASA-X GF10

Spectrum ASA-X GF10 filament is an advanced composite material

ASA 275™

External exposure, changing weather & UV resistance, high printing speed (200mm/s), HDT - 86°C.

Case study - check what this filament has been used for:

PA

Technical Data Sheet Safety Data Sheet

PA6 Low Warp CF15S

Low shrinkage and high strength paired up with the advantages of carbon fibres

Download file Download file

PA6 Low Warp GF30™

Applied glass fibers increase mechanical refinement in terms of tensile and compressive strength.

Download file Download file

PA6 Neat NT

Modified neat, HDT A - 90°C, good tribological properties; service temp. 160°C (200h) / 120°C (20.000h).

Download file Download file

PA6 Neat BK

Modified neat, HDT A - 90°C, good tribological properties; service temp. 160°C (200h) / 120°C (20.000h).

Download file Download file

PA6 CS20 FR V0

High-temperature polyamide, ceramic spheres filled, flame retardant V0, halogen free, HDT A - 90°C, no warping.

Download file Download file

PA6 GK10

10% glass microspheres, HDT A - 90°C, lighter than pure polyamide, service temp. 160°C (200h) / 120°C (20.000h), not abrasive.

Download file Download file

PA6 CF15

15% CF, HDT A - 200°C, high mechanical strength, service temp. 180°C (200h) / 150°C (20.000h). Made with LUVOCOM 3F PAHT® CF 9742 BK.

Download file Download file

PA6 Low Warp™

Good tribological properties, chemical resistance to lubricants and oils, electrical insulation properties.

Download file Download file

Flex

Technical Data Sheet Safety Data Sheet

S-Flex 85A™

Elongation at break up to 650%, Shore 98A, high tensile strength and tear strength.

Download file Download file

S-Flex 90A™

Elongation at break up to 500%, Shore 90A, resistance to oils and chemicals.

Download file Download file

S-Flex 98A™

Elongation at break up to 510%, Shore 98A, high tensile strength and tear strength.

Download file Download file

S-Flex Carbon

Filament S-Flex Carbon is an innovative 3D printing material

PETG

Technical Data Sheet Safety Data Sheet

PETG/PTFE

Well-known for its excellent mechanical properties PET-G, supplemented by adding 10% PTFE.

Download file Download file

rPETG

Environmentally friendly, made from recycled residual waste; wound on a cardboard, ecological spool.

Download file Download file

PET-G MATT

Matte finish of printed items, UV stabilization, easy and highly efficient printing, VICAT - 75°C.

Case study - check what this filament has been used for:

PET-G Premium

Combines advantages of PLA & ABS, odour-free printing, chemical resistance, HDT - 69°C, food contact compliance.

Case study - check what this filament has been used for:

PET-G Carbon

10% CF, improved rigidity, hardness & tensile resistance, VICAT - 80°C.

Download file Download file

PET-G Glow in the Dark

The transparency of PET-G makes the photoluminescence effect (glowing in the dark with its own light) even stronger.

Download file Download file

PET-G Glitter

Highly aesthetical PETG-based filament blended with high-gloss silver or gold glitter particles.

Download file Download file

PET-G FX120™

Steam sterilisation possibility, Shore 95A, temp. resistance 120°C, low odour.

Download file Download file

PET-G FR V0

Flame retardant, UL94 V0 class, free of halogens-based flame retardants.

Download file Download file

PET-G HT100™

FDA compliance, temp. resistance (100°C), low odour, clarity & gloss, chemical resistance.

Download file Download file

ABS

Technical Data Sheet Safety Data Sheet

PC/ABS FR V0

Alternative to ABS, high impact resistance, improved flow characteristics, HDT 85°C.

smart ABS™

Reduced warping, high gloss surface, durable & impact resistant, HDT - 85°C.

Download file Download file

ABS Kevlar

Composite filament based on ABS with the addition of aramid fibers, commonly known as Kevlar.

Download file Download file

ABS GP450™

Industrial grade, high mechanical strength, high printing speed (200mm/s), UL 94 HB.

Download file Download file

ABS Medical

Biocompatible up to 30 days in contact with the human body, FDA compliance.

Download file Download file

A wide range of products

Wide portfolio consisting of over 50 filaments with a versatile range of properties and applications, divided into three segments: desktop easy-to-use, industrial grade and high performance.

High quality

Innovation, extrusion know-how and highest quality filaments are the pillars of Spectrum philosophy. Our team is working continously on the development of new materials and their applications.

European made

All filaments from our portfolio are in-house made. We use modern production lines equipped with non-standard solutions to obtain highest quality final product.

Professional technical support

Our qualified support team helps at every stage from material selection to the 3D printing process.

Not sure what filament to choose?

Compare

Selected:

Compare Clear
facebook twitter youtube vimeo linkedin instagram whatsup