Show x products
PA12 CF15
Advanced technical filament reinforced with 15% carbon fibers, offering exceptional strength, rigidity and dimensional stability
- 15% carbon fiber reinforcement
- 10% lighter than PA6 CF15
- high thermal resistance up to 170°C
PA6 CF15
Filling with carbon fibers increases significantly the mechanical strength of the polyamide the material is based on. Made with LUVOCOM 3F PAHT® CF 9742 BK.
- 15% carbon fiber
- high hardness and rigidity
- heat distortion temperature – HDT A 200°C
PA6 CS20 FR V0
Thanks to the halogen-free flame retardant used, the UL-94 V0 flammability rating is achieved on >0.4 mm thick printed parts. Made with LUVOCOM 3F PAHT® KK 50056 BK FR.
- electrical insulator
- professional flame-resistant material
- raw material used complies with the EN 45545 standard in the railway industry
PA6 GK10
Filled with glass micro-spheres, being an electrical insulator, it is stiffer & lighter than the polyamide the material is based on. Made with LUVOCOM 3F PAHT® GK 9874 NT.
- chemical resistance to lubricants & oils
- good tribological properties
- high temperature up to 160°C for short-time operation (max. 200h)
PA6 Low Warp CF15S
Heat-stabilised, carbon fibre-filled composite material. A true heavy-duty specialist.
- high mechanical properties
- excellent chemical resistance
- HDT thermal resistance – 180°C
PA6 Low Warp GF30™
Applied glass fibers increase mechanical refinement in terms of tensile and compressive strength.
- 30% glass fibres
- excellent chemical resistance
- HDT thermal resistance – 180°C
PA6 Low Warp™
The improved cohesiveness of PA6 Low Warp allows the high intrinsic shrinkage to be significantly reduced.
- durable construction material
- electrical insulation properties
- chemical resistance to lubricants and oils
PA6 Neat BK
High-temperature PA6-based construction material in black colour offering increased mechanical strength & temperature resistance. Made with LUVOCOM 3F PAHT® 9936 BK.
- chemical resistance to lubricants & oils
- high resistance to corrosion stimulators
- high temperature up to 160°C for short-time operation (max. 200h)
PA6 Neat NT
Highly functional filament based on polyamide 6 with increased mechanical strength & exceptional thermal properties. Made with LUVOCOM 3F PAHT® 9875 NT.
- high creep resistance
- good tribological properties
- high temperature up to 160°C for short-time operation (max. 200h)
No search results.
